<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE article PUBLIC "-//NLM//DTD JATS (Z39.96) Journal Publishing DTD v1.2d1 20170631//EN" "JATS-journalpublishing1.dtd">
<ArticleSet>
  <Article>
    <Journal>
      <PublisherName>ijesm</PublisherName>
      <JournalTitle>International Journal of Engineering, Science and</JournalTitle>
      <PISSN>I</PISSN>
      <EISSN>S</EISSN>
      <Volume-Issue>Volume 7, Issue 4 Special Issue (NCIME)</Volume-Issue>
      <PartNumber/>
      <IssueTopic>Multidisciplinary</IssueTopic>
      <IssueLanguage>English</IssueLanguage>
      <Season>April 2018 </Season>
      <SpecialIssue>N</SpecialIssue>
      <SupplementaryIssue>N</SupplementaryIssue>
      <IssueOA>Y</IssueOA>
      <PubDate>
        <Year>2018</Year>
        <Month>04</Month>
        <Day>12</Day>
      </PubDate>
      <ArticleType>Engineering, Science and Mathematics</ArticleType>
      <ArticleTitle>EVALUATION OF SURFACE ROUGHNESS ON TURNED SPECIMEN BY USING COATED CARBIDE INSERTS [CNC TURNING]</ArticleTitle>
      <SubTitle/>
      <ArticleLanguage>English</ArticleLanguage>
      <ArticleOA>Y</ArticleOA>
      <FirstPage>367</FirstPage>
      <LastPage>373</LastPage>
      <AuthorList>
        <Author>
          <FirstName>1A.Bovas herbert</FirstName>
          <LastName>benjaxhin</LastName>
          <AuthorLanguage>English</AuthorLanguage>
          <Affiliation/>
          <CorrespondingAuthor>N</CorrespondingAuthor>
          <ORCID/>
          <FirstName>2A.</FirstName>
          <LastName>Sethupathi</LastName>
          <AuthorLanguage>English</AuthorLanguage>
          <Affiliation/>
          <CorrespondingAuthor>Y</CorrespondingAuthor>
          <ORCID/>
          <FirstName>2E.</FirstName>
          <LastName>Sivapatham</LastName>
          <AuthorLanguage>English</AuthorLanguage>
          <Affiliation/>
          <CorrespondingAuthor>Y</CorrespondingAuthor>
          <ORCID/>
          <FirstName>2J.</FirstName>
          <LastName>Suesh</LastName>
          <AuthorLanguage>English</AuthorLanguage>
          <Affiliation/>
          <CorrespondingAuthor>Y</CorrespondingAuthor>
          <ORCID/>
          <FirstName>2S.L.</FirstName>
          <LastName>Surya</LastName>
          <AuthorLanguage>English</AuthorLanguage>
          <Affiliation/>
          <CorrespondingAuthor>Y</CorrespondingAuthor>
          <ORCID/>
        </Author>
      </AuthorList>
      <DOI/>
      <Abstract>In manufacturing industry, beside the dimensional and geometric tolerance of a component, surface quality is most commonly specified requirements. Surface roughness plays an important role in the performance of the component.&#13;
&#13;
&#13;
	This is a study of the influence of the cutting parameters on the surface roughness during the turning of HCHCR alloy steel with coated tool.&#13;
	Coating on tool: titanium-nitride, AlcrN, LATUMA&#13;
	The objective was to optimization of the machining parameters as  cutting speed, feed rate and depth of cut for surface roughness.</Abstract>
      <AbstractLanguage>English</AbstractLanguage>
      <Keywords/>
      <URLs>
        <Abstract>https://ijesm.co.in/ubijournal-v1copy/journals/abstract.php?article_id=5230&amp;title=EVALUATION OF SURFACE ROUGHNESS ON TURNED SPECIMEN BY USING COATED CARBIDE INSERTS [CNC TURNING]</Abstract>
      </URLs>
      <References>
        <ReferencesarticleTitle>References</ReferencesarticleTitle>
        <ReferencesfirstPage>16</ReferencesfirstPage>
        <ReferenceslastPage>19</ReferenceslastPage>
        <References/>
      </References>
    </Journal>
  </Article>
</ArticleSet>