WEAR RATE OF (ALUMINIUM) AL-6061 ON DIFFERENT LOADS
Author: Rahul Jaiswal, Dheeraj Verma
Category: Engineering, Science and Mathematics
Abstract:
Wear is the important factor for various applications in automobile and aeronautical industries. Various researches are going on to improve the wear by either alloying the material or using the composite material. Wear is related to interactions between surfaces and more specifically the removal and deformation of material on a surface as a result of mechanical action of the opposite surface. The research work summarized in this thesis present an experimental investigation on the effect of abrasive wear rate of the material Al-6061 alloy on various load. The experiment was carried out in the laboratory using an experimental set up for the analyzing the wear rate of selected material. The experiment for analyzing the wear rate conducted on various load as well as various orientation against grinding disc. Here we study the working life of an engineering component is expired when dimensional losses exceed the specified tolerance limits. The abrasive wear behavior of selected material is analyzing at different loads and four different orientations. In the above paper I have analyzed the abrasive wear of selected material, which shows the estimated life of said material.
References:
REFRENCES:
Rabinowicz, E. (1995). Friction and Wear of Materials. New York, John Wiley and Sons.
Williams, J. A. (2005). "Wear ad wear particles - Some fundamentals." Tribology International 38(10): 863-870
Bisson, Edmond E. (1968). Various Modes of Wear and their Controlling Factors. NASA Technical Memorendum TM X-52426.
Chattopadhyay, R. (2001). Surface Wear - Analysis, Treatment, and Prevention. OH, USA: ASM-International.
Jones, M., H., and D. Scott, Eds. (1983). Industrial Tribology: the practical aspects of friction, lubrication, and wear. New York, Elsevier Scientific Publishing Company.
Glaeser, W. A., Ed. (1993).
Stachowiak, G. W., and A. W. Batchelor (2005). Engineering Tribology. Burlington, Elsevier Butterworth-Heinemann
Standard Terminology Relating to Wear and Erosion, Annual Book of Standards, Vol 03.02, ASTM, 1987, p 243-250
Sinmazcelik, T. and I. Taskiran (2007). "Erosive wear behaviour of polyphenylenesulphide (PPS) composites." Materials in engineering 28(9): 2471-2477.
Sinmazcelik, T. and I. Taskiran (2005).Friction and wear mechanism in nano material.:21(7) 2133-2137
Bayer, Raymond George (2004) Mechanical wear, press pp 112
Chang Chongyi Wang Chenggu and Jin Ying 2010. Numerical method to predict wheel/rail profile evolution due to wear. Wear, volume 269, Issues 3-4, pp 167-173.
Dharma R. Maddala, Arif Mubarok and Rainer J. Hebert 2010. Sliding wear behavior of Cu50Hf41.5Al8.5 bulk metallic glass. Wear, Vol 269, 3-4, pp 157-163.